You are here: / / DANAK Accreditation Certificates

DANAK Accreditation Certificates

Below you will find a link to our Certificates of Accreditation issued by DANAK. The certificates are your garantee of our competence.

By clicking on the link you will get a PDF-version of the certificate.

The validity of the certificates can always be checked via DANAKs homepage, by fulfilling our accreditation registration number.

Certification of Management Systems

Reg. no. 5008

Certification of Management Systems

  • AQAP-2110
  • Executive Orders on lifts, expert companies
  • Executive Order 498/2024 on pressure equipment, self-control
  • FSSC 22000
  • ISO 9001
  • ISO 22000
  • PED-Directive 2014/68/EU on pressure equipment

CA-standard ISO 17021

Reg. no. 6005

Environmental and Energy Management Systems

  • Executive Order 761/2024 on mandatory energy management
    systems in certain companies (ISO 50001)
  • Executive Order 761/2024 on mandatory energy management
    systems in certain companies (ISO 14001)
  • Executive Order 2656/2021 on  Energy Efficiency Scheme for Excess Heat
  • ISO 14001
  • ISO 50001

CA-standard ISO 17021-1:2015

Reg. no. 6504

Occupational Health and Safety

  • Executive Order on a recognized health and safety certificate achieved through DS/ISO 45001
  • ISO 45001

CA standard ISO 17021

Verification

Reg. no. 7502

GHG (CO2)

  • Commission Implementing Regulation (EU) 2018/2066 on the monitoring and reporting of
    greenhouse gas emissions pursuant to Directive 2003/87/EC
  • Commission Delegated Regulation (EU) 2019/331 on determining transitional Union-wide
    rules for harmonised free allocation of emission allowances pursuant to Article 10a of Di-
    rective 2003/87/EC of the European Parliament and of the Council
  • Commission Delegated Regulation (EU) 2024/873 amending Delegated Regulation (EU)
    2019/331 as regards transitional Union-wide rules for harmonised free allocation of emis-
    sion allowances
  • Commission Implementing Regulation (EU) 2019/1842 on laying down rules for the appli-
    cation of Directive 2003/87/EC of the European Parliament and of the Council as regards
    further arrangements for the adjustments to free allocation of emission allowances due to
    activity level changes

Sustainability Reporting (CSRD)

  • Directive (EU) 2022/2464 of the European Parliament and of the Council of 14 December 2022 amending Regulation (EU) No 537/2014, Directive 2004/109/EC, Directive 2006/43/EC and Directive 2013/34/EU, as regards corporate sustainability reporting

CA -standard DS/EN ISO 17029:2019 + DS/EN ISO 14065:2021

Product Certification / Conformity Assessment

Reg. no. 7020

Certification of Products

  • CPR Regulation (EU) 2011/305 on construction products – Cables (EN 50575) and EN 1090-1
  • ISO 3834: Quality requirements for fusion welding of metallic materials
  • MED-directive 2014/90/EU on marine equipment
  • PPE-regulation 2016/425/EU on personal protective equipment
  • Swedish Gambling Authority´s regulations
  • Technical specifications for construction products used without
    the requirements in the CPR regulation – Reinforcement Steels
  • The Danish Gambling Authorities certification programme
    SCP.00.00.DK 2.0

CA-standard ISO 17065

Reg. no. 7026

Certification of Products

  • EMC-directive 2014/30/EU on the electromagnetic compatibility of equipment
  • MID Directive 2014/32/EU on measuring instruments
  • NAWI Directive 2014/31/EU on non-automatic weighing instruments
  • OIML Certification System (OIML-CS)
  • OND-directive 2001/14/EC on noise emission by outdoor equipment
  • RED-directive 2014/53/EU on radio equipment

CA-standard ISO 17065

Reg. no. 7050

Certification of Products

  • Executive Order 99/2007 on pressure equipment
  • LIFTS Directive 2014/33/EU on lifts and safety components for
    lifts
  • PED Directive 2014/68/EU on pressure equipment (all except module A2 and permanent joining – please see accreditation 9057)
  • SPVD-directive 2014/29/EU on simple pressure vessels

CA-standard ISO 17065

Inspection

Reg. no. 9057

Pressure Equipments and Lifts

  • Danish Working Environment Authority’s Executive Orders on lifts etc.
  • Executive Order 289/2001 on transportable pressure equipment
  • Executive Order 498/2024 on pressure equipment
  • Executive Order 915/2025 on the transport of dangerous goods by road
  • Inspection in the area Executive Order 915/2025 on portable tanks not covered by Executive Order 685/2013 or Executive Order 289/2001
  • LIFTS Directive 2014/33/EU on lifts and safety components for lifts
  • PED-Directive 2014/68/EU on pressure equipment (module A2 and permanent joining)
  • SPVD-directive 2014/29/EU on simple pressure vessels
  • Tanks, containers and safety valves
  • Tank and pipe inspection – EEMUA and API
  • TPED-directive 2010/35/EU on transportable pressure equipment

CA-standard ISO 17020

Certification of Persons

Reg. no. 3001

Certification of NDT-Operators, Welders, Welding Operators and Brazers

Certification of technical qualifications of persons within the area of:

  • Brazing
  • Fusion welding
  • Non-Destructive Testing NDT

Approval of personnel for:

  • Non-Destructive Testing NDT according to Executive order 190/2015 (PED 2014/68/EU Annex I 3.1.3)
  • Permanent joining of pressure equipment according to Executive order 190/2015 (PED 2014/68/EU Annex I 3.1.2)

CA-standard ISO 17024

FORCE Certification A/S

Park Allé 345
DK-2605 Brøndby
Denmark

Shortcuts

Pressure Equipment and Lifts
Product certifications
Management systems
Certification of persons

Contact us

Get a free, no-obligation consultation with our skilled specialists who will guide you through the process.

Phone +45 43 25 01 77
Write to us →

Copyright FORCE Certification A/S

Privacy and cookie policy